WPRO KDU100 Dishwasher Care Kit
WPRO KDU100 Dishwasher Care Kit
Item No.
10156872
Reduces the build-up of limescale
Removes stubborn dirt and grease
Prevents unpleasant odours
€34.99
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.
What you’ll need to make it even better
5.00
out of 5 stars
5/5
€7.99
*Discount applied in basket
Reduces the build-up of limescale
Removes stubborn dirt and grease
Prevents unpleasant odours
Product information
Product code:
185986
Clean and care for your dishwasher with the WPRO KDU100 Dishwasher Care Kit.
Multifunction dishwasher tablets help to clean your dishes, removing both grease and stubborn dirt even at low temperatures. Degreaser fluid optimises the performance of the appliance, eliminating grease deposits and preventing unpleasant odours.
A powerful anti-limescale magnet can be used to reduce the build-up of limescale, protecting the heating element and ensuring a reliable performance.
Installation
close
Hassle-free installation
Dishwasher Installation
We can also install your new dishwasher on the day we deliver. Just add installation at the 'Confirm basket’ page, charge applies.
Here's what we'll do:
Check existing electrical and plumbing connections are safe to use and within 1.5 metres of required location.
Disconnect the existing appliance, un-box and check the new product.
Connect your new appliance to the electricity, mains water and waste.
Test there are no leaks and that the appliance is level and fully operational.
Take the packaging from your new appliance away. If you add recycling to your order we’ll also take your old appliance away for recycling.
Note: Before we arrive, you will need to make sure access is clear to the area you want your appliance installed, the appliance will fit into the space and that the electrical and plumbing connections are within 1.5 metres.
Integrated Appliance Installation
We can also install your new appliance on the day we deliver. Just add installation at the 'Confirm basket’ page at the checkout, charge applies.
Here's what we'll do:
Check existing electrical and plumbing connections are within 1.5 metres of the appliance.
Disconnect the existing appliance, remove the plinth and panel door, then un-box and check the new product.
Connect your new appliance to the electricity, mains water and waste.
Test there are no leaks and that the appliance is level and fully operational.
Re-fit the plinth and panel door to the new appliance.
Take the packaging from your new appliance away. If you add recycling to your order we’ll also take your old appliance away for recycling.
Note: Before we arrive, you will need to make sure access is clear, that the appliance is an identical size to the one it is replacing, that it will fit into the existing space and to the door panels. Plumbing and electric connections must be within 1.5 metres.
Remove and recycle your old appliance for FREE
To save you the hassle, when we deliver we can take away and recycle your old appliance, along with any packaging your new one comes in.
Please note: You will need to disconnect your old appliance before we arrive, unless you’ve bought installation (excludes gas appliances - we cannot install these and they will need to be disconnected by a registered gas installer prior to our arrival). Please make sure your appliance has been emptied of any accessories you wish to keep, and is reasonably clean inside and out. In the case of fridges and freezers, we would prefer if these are fully defrosted before we arrive, but if this is not possible, our team will ensure it’s safe to transport by securing the doors tight to reduce any water leaking on our vans.
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.