SMEG KD91XE3 Chimney Cooker Hood - Stainless Steel
SMEG KD91XE3 Chimney Cooker Hood - Stainless Steel
Item No.
10268022
74 x 89.8 x 50.2 cm (H x W x D)
Recirculation
Extraction
Max airflow rate: 600 m³/h
Noise level: 63 dB(A)
2 year guarantee
€299.99
Save €40.00
Was €339.99 (from 12/12/25 to 19/05/26)
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.
What you’ll need to make it even better
4.30
out of 5 stars
4.3/5
€104.99
Save €24.01
Was €129.00 (from 25/02/26 to 23/06/26)
*Discount applied in basket
74 x 89.8 x 50.2 cm (H x W x D)
Recirculation
Extraction
Max airflow rate: 600 m³/h
Noise level: 63 dB(A)
2 year guarantee
Product information
Product code:
605797
- This Smeg chimney hood's powerful motor keeps your kitchen free from steam when you're cooking
- It can be installed for both extraction and recirculation depending on your set up
- Ramp up the power when you need it with its 3 fan speed settings
- Its LED lighting gives you clear view of your food as it cooks away on the hob
Installation
close
Hassle-free installation
Freestanding Electric Cooker Installation
We can install your new appliance on the day we deliver. Just add installation at the 'Confirm basket’ page during checkout. Charge applies.
Here's what we'll do:
*Please note we cannot disconnect an existing gas cooker. This will have be disconnected by a registered gas installer before we arrive.
Check the area where the cooker will be installed is suitable and electrical connections meet legal requirements.
Disconnect the existing cooker, un-box and check the new product.
Connect the new cooker and make sure it’s fully operational.
Give a quick demo of the cooker and its settings, then provide you with a copy of the Electric Appliance Installation Certificate.
Take the packaging from your new appliance away. If you add recycling to your order we’ll also take your old cooker away for recycling.
Note: Before we arrive, you will need to make sure access is clear to the area you want your appliance installed, that the appliance will fit into the space and that there is a suitable electrical connection is within 1.5 metres.
Remove and recycle your old appliance for FREE
To save you the hassle, when we deliver we can take away and recycle your old appliance, along with any packaging your new one comes in.
Please note: You will need to disconnect your old appliance before we arrive, unless you’ve bought installation (excludes gas appliances - we cannot install these and they will need to be disconnected by a registered gas installer prior to our arrival). Please make sure your appliance has been emptied of any accessories you wish to keep, and is reasonably clean inside and out. In the case of fridges and freezers, we would prefer if these are fully defrosted before we arrive, but if this is not possible, our team will ensure it’s safe to transport by securing the doors tight to reduce any water leaking on our vans.
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.