LOGIK LCS16 Tilt & Swivel 13-32" TV Bracket
LOGIK LCS16 Tilt & Swivel 13-32" TV Bracket
Item No.
10138716
For 13 - 32” Televisions
Max. VESA compliance: 200 x 200
Min. VESA compliance: 75 x 75
Max. supported weight: 20 kg
Cable management
€18.99
Save €16.00
Was €34.99 (from 21/02/25 to 21/05/26)
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.
What you’ll need to make it even better
For 13 - 32” Televisions
Max. VESA compliance: 200 x 200
Min. VESA compliance: 75 x 75
Max. supported weight: 20 kg
Cable management
Product information
Product code:
148118
Good to know
- Mount your TV or monitor to the wall and save space in your living room or workspace
- You can swivel your screen from side to side and tilt it up or down to get the perfect angle
- With the built-in cable management, you won't have to worry about messy cables
- It's suitable for screens between 13" to 32" that weigh up to 20 kg
Installation
close
Hassle-free installation
TV Stand Set-up
Want your new TV Stand set up with no crossed wires? Currys experts are ready to help.
Here's what we'll do:
Discuss with you where the TV's to go and how you'd like it set up.
Disconnect your existing TV, and unbox and check your new one if you purchased one.
Attach the TV to the stand.
Tune in the TV and, provided you have the right cables, connect to any new or existing equipment such as games console, set-top box or soundbar.
Connect the TV to your existing internet connection, enabling any on-demand and Smart features.
Demo the TV's main features.
Here's what you’ll need to do before we arrive:
You've got the right cables, including any HDMI or power leads.
There's a power socket nearby (within 1.5m).
You've got your WiFi network name and password to hand for a Smart TV set-up.
Remove and recycle your old appliance for FREE
To save you the hassle, when we deliver we can take away and recycle your old appliance, along with any packaging your new one comes in. Just add Let’s recycle on the Basket page.
Please note: You will need to disconnect your old appliance before we arrive, unless you’ve bought installation (excludes gas appliances - we cannot install these and they will need to be disconnected by a registered gas installer prior to our arrival). Please make sure your appliance has been emptied of any accessories you wish to keep, and is reasonably clean inside and out. In the case of fridges and freezers, we would prefer if these are fully defrosted before we arrive, but if this is not possible, our team will ensure it’s safe to transport by securing the doors tight to reduce any water leaking on our vans.
Saved items limit reached (20/20)
To save this item, try removing something else from your
Saved items.